The Pure
Stainless Steel Juice Press is the only 2-stage hydraulic Juicer we
offer at DiscountJuicers.
We have
owned Norwalk juicers in the past, but have found the quality is lacking
and the inherent design flaws can be frustrating.
The Pure Juice Press took the basic
2-stage hydraulic press style juicer that is recommended for the popular
Gerson Therapy and made it even better.
After using the Pure Juice Press, we
simply found it to be the best 2-stage hydraulic press juicer on the market.
The PURE has the highest output and the
lowest cost of any two-stage juicer. This means, if you take every item
into consideration that contributes to the cost of owning a juicer the
PURE Juicer is the most cost effective product available.
The better your juicer the less money you spend on produce. In other
words, the PURE Juicer will pay for itself over time in produce savings.
Highest quality materials tested with intense scrutiny to make sure the
juices withstands even the hardest tries day after day, year after year.
In the end this is what really matters. Squeezing even the last drop of
liquid out of the produce to capture every enzyme.
Even the smartest piece of engineering is useless if its designer can’t
make features accessible for its user. The PURE had simplicity in mind
from the get go. It is designed based on feedback from every type of
user group and build by a team with over decade of experience, embedded
in a commitment to serve you for years to come.
You will find, that the PURE Juicer is the easiest to clean juicer as
well.
Offset Feed Chute The Offset Feed Chute prevents spraying produce on the ceiling
that can be an issue with competitor models.
Hardened Cutting
Blade The specially designed 8 blade hardened stainless steel cutting
blade will retain its edge longer and cut more efficiently than the
competitors blade.
Twist and Lock Feed Chute The easy to assemble & disassemble feed chute locks on with a click and is removed by pressing a button.
No difficult to use tool or thumb screws are used.
Stainless Press Tray
The oversize stainless steel press makes it easier to maneuver your filled pressed cloths into and out of the juicer.
Flush Mouted Grid Tray
The Grid tray mounts flush to the feed chute housing, the low profile
means no left to right transfer-snagging of the pulp pack between
folding and placement in the press chamber. The pull-tab also acts as a
hang tab for juice bags and since the PURE cutter is designed to lock to
the motor shaft in use; so the Grid Tray pull-tab is also designed as
the release-tab; so that with the lightest touch it freely ejects the
cutter. There are also two grid retention tabs so the grids are drawn
out with the tray.
Large
Pressing Chamber The over-size pressing chamber allows you to press one quart of
juice in one pressing. This is up to 20% more than the competitor
model. This can save you lots of time when pressing larger batches.
Mirror
Finish Press Plate The mirror finish press plate can be used to fix your hair!
Aside from that it is made for reinforced stainless steel that will
evenly distribute the power of the press on your produce to ensure you
get the highest yield possible.
Protective
Bumper The protective bumper on the Pure Juicer ensures the stainless
steel finish of the Juicer stays blemish free. Just take a look at
a few year old competitor model for damage that can occur.
Uniquely
Shaped Pusher The specially designed pusher ensures all the
the produce you put into the grinder is properly shred so it can be
juiced. Flat-bottomed pushers may allow pulp that does not get
ground up and may spit back up at you.
Specifications:
Stainless Steel Construction
1/2 Horsepower
372 Watts
115 Volts 60 Hertz
3450 RPM
12 Year transferable home warranty
2 Year Commercial Warranty
Accessories included:
Serrated Cutter, made from Hardened 440A
Stainless Steel Cutter with 8 teeth for easier grinding
Silicone Cutter Removal Sleeve
Mirror Polished Juice Tray; large and tall tray
for yields up to 1 liter per squeeze
Mirror Polished Feed Pan to control overflow and
guide produce into the food chute
Grid Tray and 8pc smooth sided SS grids for
juicing, nut butters, frozen treats baby food, etc.
Press Plate, easy to remove with no guide pin
required
Food Grade ABS Pusher, curved to push every bit
through and keep the pulp cool
6pc MSHP Press Cloths and 4pc MSHP Press Bags,
less pulp sticks to them making cleanup a snap
3 pcs spare Silicone O-rings
0.8 meter power cord IEC / NEMA 15-5, USA 3 pin
plug,
All food contact parts are all food grade are
stainless steel (except the Curved Pusher)
54-page Manual that is really a treatise on the
theory underlying two-stage cold press juicing